The strength of the Permanent Magnetic Drum is guaranteed to be greater than corresponding electromagnetic drum. The Permanent magnets used are everlasting magnets and its strength does not diminish during normal use and can be used through. Type KI. Size of the Drum. Over all Diamension of Separator Machine. Capacity Ton/hour. Dia mm. Length mm.
The permanent magnet materials that can be used in the magnetic system of the magnetic separator include permanent magnet ferrite, aluminum nickel cobalt, iron chromium cobalt and manganese aluminum iron, samarium cobalt permanent magnet materials, and neodymium iron boron permanent magnet materials. Powerful permanent magnets enable more efficient separation performance for a broader range of applications than ever before. The complete line includes standard models in diameters from 12 to 36 inches (305 to 915 mm), and widths from 12 to 60 inches (305 to 1525 mm). Metal Recovery from Incinerator Bottom AshMetal Removal when Recycling Rubber TyresSee full list on mastermagnets.com Dry materials are fed onto the top of the Drum Magnet, ideally from a vibratory feeder for an even spread and steady feed. Magnetically susceptible materials are attracted to the magnetic field of the stationary internal magnetic system and held to the rotating shell surface of the Drum Magnet. The revolving shell transports the magnetic particles out of the magnetic field where they are discharged into a collection area or onto a receiving conveyor. Non-magnetic material is unaffected and flows under a normal trajectory. An adjustable splitter enables a highly precise separation of the two fractions. The strength of the magnetic element (either standard strength ferrite or high-strength rare earth neodymium) is selected on the basis of the magnetic susceptibility of the material. There are two designs of magnetic system to suit specific separation objectives: 1. Axial – where the polarity runs along the width of the Drum Magnet. This is ideally suited for ferrous material recovery See full list on mastermagnets.com Drums Magnets are available in three magnetic strengths: 1. Ferrite Drum Magnet (standard strength) – Ideally suited for separating larger ferrous tramp metal and strongly magnetic particles; 2. Rare Earth Drum Magnets (high-intensity) – for the separation of fine ferrous particles and weakly magnetic materials; 3. Wire Wrapped Rare Earth Drum Magnets (extreme-intensity) – for the separation of para magnetic materials specifically for mineral processing and foundry applications; Standard Drum Magnet diameters range from 300mm to 600mm in 50mm increments. Bunting provides bespoke designs and has supplied Drum Magnets with diameters from 200mm up to 900mm. Drum Housings Drum Magnets are supplied as bare drum (for incorporation into a customer’s machine or process) or in a completely enclosed housing. The enclosed housing option is recommended to retain contaminations (e.g. dust). Housings are manufactured in robust mild steel or stainless steel. Inspection covers, aspirators and split See full list on mastermagnets.com The permanent Drum Magnet is perfectly designed to remove ferrous and weakly magnetic particles from dry non-metallic minerals. Specific applications include: 1. Mineral Processing 1.1. Feldspar 1.2. Silica Sand 1.3. Garnet 1.4. Abrasive and refractory minerals including Corundum 1.5. Beach Sands (ilmenite, etc) 1.6. Fine iron ores 2. Ceramics 2.1. Removing free fine iron from spray dried ceramics; 3. Recycling 3.1. Cullet (crushed glass) 3.2. Metal recycling plants 3.3. Granulated steel slag 3.4. Granulated plastic waste 3.5. Recovering ferrous metal from incineration ash 4. Foundries 4.1. Separating and recovering ferro and para magnetic particles from reclaimed foundry sand 4.2. Recovering Chromite 5. Plastics 5.1. Removing ferrous metals from plastic beads 6. Food Processing 6.1. Grain 6.2. Granular materials See full list on mastermagnets.com Magnetic Drum Separator aka drum magnet with housing or housed drum magnet can remove iron contaminants from powder or fine-grained materials, it is suitable for purification of non-metallic ores such as refractory materials, glass, ceramics, abrasives, etc. Widely used in chemical, food, electronics and recycling industries.
The regular permanent magnetic separator rely on magneto-static force to recovery ferromagnetic metal from ferromagnetic or non-ferromagnetic mixture, and widely served for mineral separation, garbage disposal or food industry. Permanent magnetic separators are always occupying a large proportion in permanent magnet markets.
Buy Permanent Magnetic Drum Separator in Ganderbal from top Permanent Magnetic Drum Separator Manufacturers in Ganderbal and Permanent Magnetic Drum Separator Suppliers in Ganderbal, exporters - Kumar Magnet Industries (+91) 8000202090 | [email protected]
Magnetic drum separator /wet magnetic separator is used for wet magnetic separation of magnetite, pyrite, titanic iron and etc. with the size no more than 3mm. It is also often used to get rid of iron content in coal, nonmetal materials, and building materials.
Strong magnetic force achieves recovery of fine muddy sludge. Offered solutions according to our needs and responded flexibly. Succeeded in cutting maintenance cost significantly due to high sludge collection capability. Successfully reduced operational cost by extending the magnet drum life. Difficult maintenance, easy-to-forget maintenance.
Magnetic drum separators with permanent magnets are generally used for the separation of iron from medium coarse to fine bulk materials. The arrangement and the inner magnet system are selected according to the processing goal.
PSI Technologies can offer magnetic drum separators and High intensity magnetic roll separators in a wide ranging magnetic strength from 300 Gauss to 12000 Gauss to meet your application needs. Applications for magnets :
Magnetic particles are attracted by the internal permanent magnet, whereas nonmagnetic particles follow their flight path determined by inertia and gravity. The attracted material is conveyed by the drum shell to the end of the magnetic field and dropped to the other side of an adjustable splitter.
7. To remove fine irons from a large amount of material separation.Drum Magnets supply big working surface increasing the throughput rate of materials Drum Magnetic Separators are applied in Sugar Mills, Cement, Food Processing, Fertilizer, Glass, Rubber Processing and Chemical Industries.